Compact smart fingerprint lock

• No key required to open. Your fingerprints are the key.
• Fingerprint recognition in 0.5 seconds.
• The lock stores up to 20 fingerprints in its memory.
• The lock body is splash-proof – you can use it outdoors without any problems.
• One charge of the 60 mAh battery is enough for 6 months of operation in standby mode.
• Low battery warning (red light comes on after the lock is opened).
• When the battery is discharged, the lock remains closed and all fingerprints remain in the device's memory.
• To open the lock after it has been discharged, you need to connect it to a power source – it will turn on immediately.
• The lock uses fast charging technology. Charging occurs via a Micro-USB cable. A red light illuminates while charging. The light turns off when charging is complete.
• Operating temperature: -20 to 70 degrees Celsius. Humidity from 0 to 95 %.
• Lock size: 50x27x14 mm.
• Lock weight: 22 grams.
• Lock material: aluminum alloy body, stainless steel bracket.

• Note: The first two fingerprints are admin fingerprints. They are used to add and remove fingerprints from the lock's memory.
• How to add your first fingerprint:
  1. Press your finger on the scanner and release it as soon as the blue light comes on.
  2. Place your finger on the scanner until the green light flashes (you need to touch different sides of the fingerprint) – 1 fingerprint is registered.
• How to add 2-20 fingerprints:
  1. Press the admin’s fingerprint (1 or 2 fingerprints) to the scanner and release it as soon as the blue light flashes.
  2. Place a new finger on the scanner until the green light flashes (you need to touch different sides of the fingerprint) – the fingerprint is registered.
• How to remove all fingerprints:
  1. Press the admin's fingerprint to the scanner and release it as soon as the red light flashes.
  2. Touch the admin's fingerprint again - the green light comes on - all fingerprints are erased.

We can also recommend full-size biometric lock.